![]() ![]() To describe this process accuratly, one could say that, for the drawing to fit on a certain sheet of paper, the drawing has been made at 1/48 its full scale (if 1/4″=12″,1/4×1/12=X, therefore X=1/48). has already done much of the calculation necessary to draw at desired scale. On such a scale, if using 1/4″= 1′-0″, 1′ is shown on the scale as 1/4″ in lenght 2′ are shown as 1/2″, and so on. With hand drafting, one would typically use an architect’s or engineer’s scale to assist in correctly making a drawing “to scale”. The XP scale is the relationship between the desired plotted scale and the sheet of paper on which it will be plotted. ![]() ![]() Many clients, including governement agencies, will require a minimum text size for legibility. If the same drawing will be printed at 1/4″=1′-0″, and that the text also needs to be 1/8″ high, any text related to 1/4″ scale output would be set to 6″ in the model. Because all work is done in AutoCAD models should be at 1:1, text and labels must be adjusted to appropiate sizes based on the scale at which they will be printedįor example: if a detail drawing will be printed at 3″=1′-0″, and the desired height of the text when printed is 1/8″, the text in the model must be set to 0.5″. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |